P-10 CONNECTORS WITHOUT LEVER (Box of 2000)

Stock Code: 145358

Out of Stock

Descriptions

Lamello Clamex P-10 CNC Connectors are available from Brighton Tools

* Delivery time for this item is on a 10 - 14 days

Detachable connector for materials from 12 mm thickness

Detachable furniture connector, installed in seconds
For miters from 15 mm and butt joints from 12 mm material thickness
Aesthetic look with the hardly visible 6 mm access hole
All-rounder for all angle and miter joints from 22.5° to 180°
Ideal for thin materials, miters, wooden drawers, open shelves

The Clamex P-10 is a detachable furniture connector that is inserted into the workpiece with a positive lock in seconds. The Clamex P-10 is powerfully connected and released using a lever in a similar way to a cam connector. Compared to the Clamex P-14, the Clamex P-10 has a groove depth of only 10 mm and can therefore be used for thinner materials. The furniture connector is ideal for mitre connections and sharp angles. Like the larger Clamex P-14, the Clamex P-10 also requires an access hole of just 6 mm in diameter. Combined with its small size, the furniture connector enables aesthetic furniture designs in thin material thicknesses with joints that are almost completely concealed and in many angles. The Clamex P-10 does not use adhesive and is distinguished by its time-saving manufacturing process. The P-System groove is produced either with the Zeta P2 biscuit joiner or a CNC machining centre. The connectors are then pushed into the grooves in seconds and the workpieces are assembled and powerfully connected using levers. Waiting times are completely eliminated and an assembled workpiece can be further processed straight away or made available for shipping.

Applications:

Detachable connecting fitting for panel materials in furniture construction
Gluing aid for mitres or difficult-to-clamp angles
Concealed mitres in plywood from 15 mm or chipboard from 16 mm
Joining of wooden drawers from a material thickness of 12 mm
In kitchen manufacturing in tall cupboards, carcass manufacturing or open shelf units
In furniture construction involving high-quality furniture with mitre connections or unusual angles, wine racks or bookshelves
Butt joints from a material thickness of 12 mm
Mitre connections from a material thickness of 15 mm

Lamello Catalogue (21 MB)

Installation tolerance longitudinal	± 0.5 mm
Installation tolerance radial	± 0.5 mm
Minimum workpiece width	65 mm
Minimum material thickness for edge cuts	12 mm
Minimum material thickness for surface cuts	11 mm
Minimum material thickness for centre wall machining	19 mm
Minimum material thickness for angle bisector	15 mm
Adjustment Lamello-System	Max.
Adjustment P-System	P-11