DIVARIO P-18 CONNECTORS (80 Pairs)

Stock Code: 145550

2 In Stock

Descriptions

Lamello Divario P-18 Connectors are available for next day delivery from Brighton Tools

Self-clamping, invisible connector for slide insertion

Furniture connectors for subsequent insertion of shelves or partitions
Quick assembly on site - insert. Done.
Divario P-18 tensions the joint perfectly during insertion
Invisible connection for maximum aesthetics
Ideal for wall units, wine racks, large pieces of furniture, flat-pack furniture

The Divario P-18 is a detachable furniture connector for slide insertion. The groove is milled with a Zeta P2 biscuit joiner or a CNC machining centre and the connector is anchored in the workpiece in seconds using the positive-locking P-System groove. The Divario P-18 is designed so that it clamps the workpieces together during insertion and thus ensures perfectly tight joints. The build-up of pressure itself only occurs at specific points and not over the entire insertion length, which facilitates insertion. Since no lever or cam needs to be used, assembly is very efficient and the connector is invisible. If a piece of furniture or a shelf unit is manufactured with several fixed shelves or separating walls, the Divario P-18 offers the option of connecting the outer carcass first. The interior, i.e.fixed shelves or dividing panels, are then inserted piece by piece. This means that a bookcase can be transported in individual parts or simply as a simple carcass, saving space and weight. The shelves are simply inserted on site. The press-fit joint between the components allows the joint to take on high tensile forces. For example, a vertical centre bar can firmly connect the underside of a hanging shelf and bear loads. A groove is milled in the shelf at the front so that the workpiece can be installed via the protruding connector half at the side. The small groove on the rear side of the shelf can be unsightly when creating a shelf that is visible from both sides. For this purpose, the longitudinal groove is offset on both sides so that the joint is completely concealed from all sides. In this application, the shelf is not inserted afterwards, but is inserted and moved during the assembly of the shelf until it is clamped.

Self-clamping furniture connector for inserting shelves or vertical dividing panels
In combination with the Clamex P or Tenso P, which are used for the corner connections
In kitchen manufacturing in tall cupboards, carcass manufacturing or open shelf units
In interior fitting for shelf partitions in built-in cabinets
In furniture construction for high-quality furniture, wine racks or bookshelves
Stronger alternative to standard connecting fittings
Dividing panels from a material thickness of 18 mm
Shelves from a material thickness of 12 mm

Lamello Catalogue (21 MB)

Installation tolerance longitudinal	± 2 mm
Installation tolerance radial	± 0 mm
Minimum workpiece width	83 mm
Minimum material thickness for edge cuts	12 mm
Minimum material thickness for surface cuts	11 mm
Minimum material thickness for centre wall machining	18 mm
Tensile strength in particle board	740 N
Tensile strength in MDF	1090 N
Tensile strength in beech	1070 N
Shear strength in particle board	590 N
Shear strength in MDF	740 N
Shear strength in beech	1820 N
Size (LxWxH)	72 x 25 x 9.7 mm