HINGE RECESSING JIG - SINGLE PIECE (HINGE/JIG)

Stock Code: HINGE/JIG

Out of Stock

Not available to order

Hinge Recessing Jigs are available for next day delivery from Brighton Tools

The single piece Contractor Hinge Jig is designed for recessing hinges in wooden doors & frames with a plunge router.

It is easy to use with minimal setting-up time, completing the job both accurately & quickly.
Used on-site & in joinery shops to increase productivity with excellent results.
Four apertures for fire door requirements.
No need for marking out in the conventional way.
Quick & simple to set-up as the hinge is used as the pattern.
Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges.
Can be used on both inside and outside doors, rebated frames and on maximum 25mm thick fixed stops.
Use with a light duty plunge router with 1/4 inch collet.
Long reach router cutter required, 12mm diameter with 70mm overall length.
Angled position slots to prevent creep.
Unibase may be needed.
T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160.

Hinge sizes
Length min.	2 5/8" (67 mm)
Length max.	5" (127 mm)
Width min.	3/8" (9.5 mm)
Width max.	1 3/8" (35 mm)
Width max. in 35mm rebate	20 mm
Width max. in 44mm rebate	30 mm

Door sizes possible
Height min.	6' 5" (1955 mm)
Height max.	2100 mm*
Thickness min.	5/8" (16 mm)
Weight	2.9 kg
Jig overall length	1957 mm
Plate thickness	2 mm
Fixed stop max. thickness	25 mm**

* Please note for doors over 2040mm the bottom hinge will be higher than 9" up.
** Max. hinge leaf width 20mm (35mm doors)